Produce as fast as 1-3 business days

3D Printing Materials in Indonesia

CHOOSING THE RIGHT MATERIAL

MATERIAL GUIDE

Easily understand how you can utilise our range of materials for your on demand manufacturing needs.

FUNCTIONAL END USE

Always consider our functional material range when you require

  • Outdoor usage
  • UV resistance
  • Impact resistance
  • Tough, durable parts
  • Heat & chemical resistance
  • Replace traditionally moulded parts
  • Scalable production up to 1, 000 parts
  • Certified biocompatible, FDA approved

PROTOTYPE TEST

Always consider our prototyping material range when you require

  • Indoor usage
  • Transparent
  • Translucent
  • Intricate details
  • Master mould patterns
  • Smooth surface
  • Visual prototypes
  • No heat or impact resistance requirements

FUNCTIONAL MATERIAL SPECIFICATIONS

Replace traditionally moulded parts on demand with our functional material with no tooling or setup cost. Scale from 1 to 1,000 parts in days.

SLS 3D Printing Indonesia
MaterialNylon PA12 | PA2200
ProcessEOS SLS
ColourWhite, Black, Blue, Red, Yellow, Orange
Surface textureMatte
AccuracyGood
Layer height100 μm
Smallest feature0.7 mm
Suitable for outdoorYes
Watertight Yes (>4mm thick)
General StrengthExcellent
BiocompatibleYes
FDA ApprovedYes
Flame RatingUL94-HB
Heat Deflection (A/50)181ºC
Elongation at Break24%
Tensile Strength48 MPa
Tensile Modulus1700 MPa
Build Size (mm)230L x 180W x 313H
MJF 3D Printing Indonesia
MaterialNylon PA12 | HP HR PA12
ProcessHP MJF 5200
ColourBlack, Raw Grey
Surface textureMatte
AccuracyGood
Layer height80 μm
Smallest feature0.5 mm
Suitable for outdoorYes
Watertight Yes ( ≥2mm thick)
General StrengthExcellent
BiocompatibleYes
FDA ApprovedYes
Flame RatingUL94-HB
Heat Deflection (@0.45 MPa)175ºC
Elongation at Break20%
Tensile Strength48 MPa
Tensile Modulus1800 MPa
Build Size (mm)380L x 280W x 380H
MJF TPU 90A 3D Printing Service Indonesia
MaterialTPU 90A | HP MJF
ProcessHP MJF 5200
ColourBlack, Raw Grey
Surface textureMatte
AccuracyGood
Layer height100 μm
Smallest feature0.5 mm
Suitable for outdoorYes
Watertight Yes ( ≥2mm thick)
General StrengthExcellent
BiocompatibleYes (Skin Contact)
FDA ApprovedYes (Skin Contact)
Flame RatingUL94-HB
Heat Deflection (A/10N)98ºC
Elongation at Break150-280%
Tensile Strength7 MPa
Tensile Modulus85 MPa
Build Size (mm)380L x 280W x 380H
Ultem FDM 3D Printing Indonesia
MaterialABS M30, PC, ULTEM, PEKK
ProcessProduction FDM
ColourMultiple Options
Surface textureVisible layer lines
AccuracyGood
Layer height100 – 200 μm
Smallest feature1.2 mm
Suitable for outdoorYes
WatertightNo
General StrengthGood
BiocompatibleYes (ABS M30i)
FDA ApprovedYes (ABS M30i)
Flame RatingUL94-V0 (Ultem)
Heat Deflection (@0.45 MPa)
Elongation at Break
Tensile Strength
Tensile Modulus
Build Size (mm)900L x 600W x 900H
SLM Aluminium 3D Printing Service Indonesia
MaterialAluminium AlSi10Mg
ProcessSLM
ColourRaw Metallic Matte
Surface textureSlightly grainy matte 
AccuracyGood
Layer height50 μm
Smallest feature0.7 mm
Suitable for outdoorYes
WatertightYes ( ≥3mm thick)
General StrengthGood
Biocompatible
FDA Approved
Flame Rating
Melting Temp~550ºC
Elongation at Break6-9%
Tensile Strength440 MPa
Tensile Modulus68 GPa
Build Size (mm)250L x 250W x 350H
SLM Stainless steel 3D Printing Service Indonesia
zMaterialStainless Steel SS316L
ProcessSLM
ColourRaw Metallic Matte
Surface textureSlightly grainy matte 
AccuracyGood
Layer height50 μm
Smallest feature0.7 mm
Suitable for outdoorYes
WatertightYes ( ≥3mm thick)
General StrengthGood
Biocompatible
FDA Approved
Flame Rating
Melting Temp~1300ºC
Elongation at Break35-40%
Tensile Strength670 MPa
Tensile Modulus190 GPa
Build Size (mm)250L x 250W x 350H

PROTOTYPING MATERIAL SPECIFICATIONS

Select our prototyping material for visual prototyping, design form & fit verification, intricate parts, aesthetic focused parts.

SLA 3D Printing Indonesia Online
MaterialDetailed Plastic
ProcessIndustrial SLA
ColourWhite
Surface textureSmooth
AccuracyGood
Layer height100 μm
Smallest feature0.7 mm
Suitable for outdoorNo
WatertightYes
General StrengthLow
BiocompatibleNo
FDA ApprovedNo
Flame Rating
Heat Deflection (@0.45 MPa)56ºC
Elongation at Break10%
Tensile Strength50 MPa
Tensile Modulus2500 MPa 
Build Size (mm)600L x 700W x 500H
SLA HD Resin 3D Printing Indonesia
MaterialHigh Detailed Plastic
ProcessSLA HD
ColourWhite, Black, Translucent
Surface textureSmooth
AccuracyExcellent
Layer height20 – 50 μm
Smallest feature0.4 mm
Suitable for outdoorShort Exposure
WatertightYes
General StrengthMedium
BiocompatibleYes
FDA ApprovedNo
Flame Rating
Heat Deflection (@0.45 MPa)70ºC
Elongation at Break10%
Tensile Strength60 MPa
Tensile Modulus2800 MPa 
Build Size (mm)170L x 100W x 170H
SLA Transparent 3D Printing Indonesia
MaterialTransparent | Translucent
ProcessIndustrial SLA
ColourTransparent, Translucent
Surface textureSmooth
AccuracyGood
Layer height100 μm
Smallest feature0.7 mm
Suitable for outdoorNo
WatertightYes
General StrengthLow
BiocompatibleNo
FDA ApprovedNo
Flame Rating
Heat Deflection (@0.45 MPa)50ºC
Elongation at Break7%
Tensile Strength55 MPa
Tensile Modulus2800 MPa 
Build Size (mm)450L x 350W x 450H
SLA TPU Rubber 3D Printing Indonesia Online
MaterialTPU Rubber Like
ProcessSLA & Vacuum Cast
ColourBlack, White, Clear
Surface textureSmooth
AccuracyGood
Layer height150 μm
Smallest feature1 mm
Suitable for outdoorYes
WatertightYes
Shore hardness30 – 90 A
Biocompatible
FDA Approved
Flame Rating
Heat Deflection (@0.45 MPa)80ºC
Elongation at Break45 – 700%
Tensile Strength16 – 30 MPa
Compressive Set10 – 40 %
Build Size (mm)380L x 280W x 380H

*Respective users should conduct own testing to determine material suitability. These data are best of our knowledge and only for reference, they do not guarantee any applications.