Produce as fast as 7 business days

MJF TPU 90A 3D Printing Service Indonesia

HP MULTI JET FUSION 5200

TPU 90A MJF

Flexible, Compressible & Tough

Technical Datasheet

90A

SHORE HARDNESS

7MPA

TENSILE STRENGTH

23%

COMPRESSIVE SET

150-280%

ELONGATION AT BREAK

120°C

MELTING POINT

MJF TPU 3D Printed Sample Indonesia

FLEXIBLE & TOUGH

Our TPU 90A MJF, also known as Ultrasint TPU-01, is produced by MJF 5200 Industrial 3D Printing. Produce tough yet flexible parts that could absorb shock with good elasticity. Using cutting edge multi jet fusion technology, this material does not require support structures during the build process enabling easy creation of parts with unrestricted design freedom. This material can be used as functional parts such as shoe soles, grippers, enclosures and tools that requires flexibility.

INDUSTRIAL GRADE QUALITY

Right out of production, this material exhibit matte raw grey texture. Surface is slightly rougher than MJF nylon parts. This materials comes in raw grey or dyed black.

MJF TPU 3D Printed Pipe

EXAMPLE APPLICATIONS

MJF TPU 3D Printed Enclosures

PRODUCT ENCLOSURE

Ultrasint TPU 3D Printing Service

SHOE SOLES

MJF TPU 3D Printing Service Indonesia

SHOCK ABSORBER

LEAD TIME

  • Standard Lead Time: Ship in about 7-11 business days

SPECIFICATION

  • Build Size: 380L x 280W x 380H (mm)
  • Minimum Wall Thickness: 1mm (may vary)
  • Minimum Detail: 0.5 mm
  • Estimated Accuracy: +/-0.3mm typically (0.3% of longest side)
  • Colour: Raw Grey or Black
  • Shore Hardness: 90A

BENEFITS

  • Flexible
  • Durable
  • Compressible
  • Hard rubber
  • Good elasticity
  • Scalable for batch production

DESIGN FOR TPU RUBBER LIKE

Wall thickness for 3D Printing

Minimum Wall Thickness

We recommend the following minimum wall thickness:

  • 1 mm (parts ≤ 10 cm)
  • 2 mm (parts between 10 cm to 30 cm)
  • 3 mm (parts ≥ 30 cm)

Parts with Sufficient wall thickness is crucial to ensure successful print.

Embossed and Engrave Details for 3D Printing

Embossed and Engraved Details

For Embossed Details: Recommended minimum thickness of 0.5mm and height of 0.5mm

For Engraved Details: Recommended minimum thickness of 0.5mm and depth of 0.5mm

Clearance for 3D Printing

Clearance for Fitting

It is very important to allow clearance between the space of 2 objects, so as to give a freedom of movement between the gap. We recommend:

  • 0.1 mm (tight fit), 0.2 mm (standard fit) and 0.4 mm (loose fit).

You are advised to test out several iterations to attain a perfect fit.

Hollow 3D Printed Parts

Hollowing Model

It is highly recommended to hollow out solid models to reduce cost and avoid shrinkage issues. We recommend:

  • Wall Thickness of ≥ 3mm for model below 35cm
  • Wall Thickness of ≥ 4mm for model between 35 to 60 cm

‘Escape Holes’ may be added to your model to drain excess material.

Warp 3D Printed Parts

Reduce Warpage

Warpage issues isn’t applicable for this material since it is flexible in nature.

Multiple Parts in Single File

Avoid Multiple Parts in a single file

Uploading multiple parts within a file may cause unnecessary delay in your order due to processing issues. Simply upload each part file separately for a smooth transaction.