Produce as fast as 3-5 business days

SLA transparent 3D Printing Online Indonesia

INDUSTRIAL SLA PROCESS

TRANSPARENT PLASTIC SLA

Rigid, Smooth & Transparent

Technical Datasheet

2800MPA

TENSILE MODULUS

55MPA

TENSILE STRENGTH

0.6KJ/M²

IMPACT STRENGTH

7%

ELONGATION AT BREAK

50°C

HDT@0.45 MPA

RIGID, SMOOTH & TRANSPARENT

Our Transparent Plastic, also known as SLA Clear Resin, is produced by SLA Industrial 3D Printing process. This 3D printing material can capture optically clear parts with smooth surface finishing with almost nonvisible 3D Print layer lines. This material is probably one of the most transparent 3D Printed material around. This is a rigid material that is recommended to be used for design verification, bottle prototypes, research and other see through parts that does not require demanding mechanical or thermal properties.

OPTICAL CLARITY

Right out of production, this material is translucent in texture. Further polishing must be done, and transparent coating must be applied to attain high transparency. Thicker walls may appear more translucent with a slightly bluish tint. Transparent coating may further add up to 0.3-0.5mm surface layer. Translucent, frosted, and colour tinting option is available in this material.

TRANSLUCENT OPTION

Translucent is available as an option. Skip the transparent coating when dimensional accuracy is critical. Alternatively, opt for a light coat of transparent coating for a better balance between accuracy and transparency.

OPTICALLY CRAFTED

Our Transparent Plastic is optically crafted by industrial SLA equipment. Using Stereolithography Process also known as SLA, parts are precisely constructed by curing photopolymer with strong laser beams at fine resolution. Since this is such a high-resolution process, with almost no visible layer lines, producing parts that are transparent is possible. Our Transparent Plastic is produced at about 0.1mm layer resolution.

EXAMPLE APPLICATIONS

SLA transparent 3d printed bottle prototype Indonesia

PRODUCT PROTOTYPE

BOTTLE PROTOTYPE

SLA translucent 3D Printed enclosure Indonesia

ENCLOSURE & HOUSING

LEAD TIME

Standard Lead Time: Ship in about 5-7 business days
Expedited Lead Time: Ship in about 3-5 business days (High Detailed Plastic, translucent option)

SPECIFICATION

Build Size: 450L x 350W x 450H (mm)
Minimum Wall Thickness: 1mm (may vary)
Minimum Detail: 0.5 mm
Estimated Accuracy: +/-0.2-0.3mm typically (0.3% of longest side)
Transparent Coating may add 0.3-0.5mm layer thickness

BENEFITS

High degree of clarity
Smooth Surface
Close to injection moulded appearance
Rigid Plastic
Suitable for “See Through” application

DESIGN FOR TRANSPARENT PLASTIC

Minimum Wall Thickness

We recommend the following minimum wall thickness:

1 mm (parts ≤ 10 cm)
2 mm (parts between 10 cm to 30 cm)
3 mm (parts ≥ 30 cm)

Parts with Sufficient wall thickness is crucial to ensure successful print.

Embossed and Engrave Details for 3D Printing

Embossed and Engraved Details

For Embossed Details: Recommended minimum thickness of 0.5mm and height of 0.6mm

For Engraved Details: Recommended minimum thickness of 0.6mm and depth of 0.6mm

Clearance for Fitting

It is very important to allow clearance between the space of 2 objects, so as to give a freedom of movement between the gap. We recommend:

Transparent Plastic: 0.5 mm (tight fit), 0.6 mm (standard fit) and 0.7 mm (loose fit)
Translucent or Light Transparent Coat: 0.15 mm (tight fit), 0.25 mm (standard fit) and 0.4 mm (loose fit).

You are advised to test out several iterations to attain a perfect fit.

Hollowing Model

Hollowing of transparent material is not recommended as the internal cavity will be impossible to post processed but still visible from the outside. Thus, you would expect an untidy and messy end product aesthetically.

In the event, you still need to hollow out your transparent parts, ‘Escape Holes’ may be added to your model to drain excess material.

Reduce Warpage

For models with large flat unsupported planes, there is a risk of warpage. To prevent this, consider adding ribs as reinforcement to combat this issue.

Avoid Multiple Parts in a single file

Uploading multiple parts within a file may cause unnecessary delay in your order due to processing issues. Simply upload each part file separately for a smooth transaction.